CAROLINA SKY
(803) 487-8647
Insured
Recoated multi-level parking deck in Charlotte, NC
Epoxy Floors & Striping

Commercial epoxy flooring in Charlotte, NC, plus parking deck striping.

Commercial epoxy flooring is a resin coating bonded to prepared concrete to resist abrasion, chemicals and tire traffic. Parking deck striping adds stall lines, arrows and safety markings in traffic paint. In Charlotte, Carolina Sky Painting grinds and repairs the slab, applies epoxy or polyaspartic systems, and stripes decks one level at a time.

What commercial epoxy flooring and striping includes

Warehouse floors, stairwells, ramps and parking structures prepped, coated and striped in phases, so the facility keeps moving while the work gets done.

  • Mechanical surface prep before any coating
  • 100% solids epoxy and fast-cure polyaspartic systems
  • Stall lines, arrows, curbs and accessible spaces
  • Phased closures so the deck or floor stays in use
01Scope

Floor coatings and markings for working facilities.

Coatings fail when the prep is skipped. Every scope below starts with the concrete, not the color.

Concrete Surface Prep

Diamond grinding or shot blasting to open the slab so the coating bonds instead of peeling.

Crack & Joint Repair

Cracks, spalls and control joints filled and leveled before the first coat goes down.

Epoxy Floor Coatings

100% solids epoxy for warehouses, back-of-house areas and mechanical rooms.

Polyaspartic Topcoats

Fast-curing, UV-stable topcoats that shorten downtime and hold their color.

Stairwells, Treads & Landings

Slip-resistant coatings on treads and landings, with walls and rails repainted to match.

Parking Deck Recoats

Columns, ceilings and walls brightened level by level while the garage stays open.

Line Striping & Arrows

Stall lines, directional arrows, stop bars and crosswalks in durable traffic paint.

Safety & Accessible Markings

Curbs, fire lanes, bollards and accessible parking spaces marked clearly and consistently.

02Buyer's Checklist

How to vet a floor coating contractor in Charlotte

A floor coating is only as good as the slab under it. These questions show whether a bidder plans to prep the concrete or just paint over it.

Surface prepAskHow will the concrete be profiled before coating?Carolina SkyMechanical prep by grinding or shot blasting. Acid washing alone is not a profile.
MoistureAskWill the slab be checked for moisture first?Carolina SkyWe check the slab and choose a system that suits what we find.
System, not productAskWhat are the primer, build coat and topcoat?Carolina SkyEach layer is named on the proposal with its purpose.
DowntimeAskWhen can foot and vehicle traffic return?Carolina SkyReturn-to-service times are written into the schedule for every phase.
Traffic controlAskHow is the deck or floor kept in use during work?Carolina SkyWe close one level or zone at a time with barricades and signage.
LayoutAskWho confirms the stall count and accessible spaces?Carolina SkyThe striping layout is reviewed with you before any line is painted.
03Completed Work

Floor coating and parking structure work in Charlotte

View full portfolio
Metropolitan Parking Deck, Charlotte, NC
Charlotte, NC

Metropolitan Parking Deck

A full-deck recoat with wall-to-wall containment and masking that brightened a multi-level structure while the garage stayed operational.

Safety Striping & Ramp Coating, Charlotte, NC
Charlotte, NC

Safety Striping & Ramp Coating

High-durability epoxy coatings on ramps and new safety striping for a commercial parking facility.

Multi-Level Stairwell Repaint, Charlotte, NC
Charlotte, NC

Multi-Level Stairwell Repaint

Epoxy coatings on treads and landings, durable wall paint and red pipe detailing in a high-traffic commercial stairwell.

04FAQ

Epoxy flooring and striping questions

Straight answers for property managers, owners and general contractors. Call or email if yours is not here.

Most floors take two to four working days: one for surface prep and repairs, one or two for the coating system, then cure time before traffic returns. Fast-cure polyaspartic systems can shorten that. Large floors are split into zones so part of the space stays in use.

Epoxy builds a thick, hard, chemical-resistant film and is the usual base coat. Polyaspartic cures much faster and resists UV yellowing, so it is often used as the topcoat or where downtime has to be short. Many commercial floors use both.

Yes. We close one level or section at a time, stripe it, let the paint cure and reopen it before moving on. Signage and barricades direct drivers around the closed area.

Almost always because of poor surface prep or moisture in the slab. Coating over smooth, sealed or damp concrete gives the epoxy nothing to bond to. Mechanical grinding or shot blasting and a moisture check before coating prevent most failures.

Request a Proposal

Send us the property.
We'll send back a proposal.

Walkthrough, transparent scope, line-item quote. Most proposals come back within 48 hours. For multi-building portfolios, we'll acknowledge same day and turn a detailed package inside one week.